جديد ماكينة نثر الأسمدة السائلة Marco-Polo Gülletankwagen / Slurry tanker / Tonne à lisier 12 000 l

Marco-Polo MPR-2S/12000 Slurry Tanker

Chassis Construction:
Self-supporting structure
Removable D-50 drawbar eye
Rigid metal drawbar, powder-coated
Coupling to tractor via lower transport hitch
Mechanically adjustable support leg

Running Gear:
Two-axle wheel set, rear steering axle
Tyres 550/60-22.5
Pneumatic brakes, dual-circuit / single-circuit

Tank:
Pressure tank with 12,000 L capacity
Two internal reinforcing rings made of T-section steel
Hot-dip galvanized inside and outside with additional passivation
Rear end plate with Ø 600 mm manhole
Two 4" sight glasses on the front end plate
Upper overflow stub pipe at the highest point for overflow valve
Upper filling hatch Ø 210 mm
Anti-overflow baffle
Compressor
Vacuum pump type 9000 MEC/M

Overfill protection:
Maximum vacuum – 0.94 bar
Dual-ball overflow valve
Shut-off siphon valve with sight glass and drain valve

Safety Valves:
Safety valve (on compressor) 1 1/2″
Vacuum relief valve 1 1/2″
Pressure gauge D100, range –1 / +1.5 bar
Muffler–oil recovery system
Tank Filling and mptying System
Stubs and Valves
Rear suction stub 6", capped
Rear disc arge stub with 6″ double-flange gate valve and hydraulic cylinder; foldable discharge chute + suction hose connection
Left side stub 6", capped
Right side stub 6", capped

Connection Accessories:
Galvanized quick coupling with flange for hose connection
Suction hose Ø 126 mm (internal), 6 m long, with suction strainer
Wide-angle slurry spreader; working width up to 14 m, outlet version B
Electrical Installation
Road-legal electrical and lighting system, LED 12 V + 1 beacon
Front white position lights
Rear road lights with indicators
Side reflectors – orange
7-pin connector cable
Triangular slow-moving vehicle sign on rear end plate
Additional Equipment Included
Nameplate, user manual, EU declaration of conformity / CE marking

Optional Equipment (extra cost)
Trailing hose applicators 3–18 m
Two-row tine applicators 4–6 m
Two-row disc applicators 3–4 m
Skid/shoe applicators 6–18 m
Three-point hitch for applicator mounting
Hydraulic mixer
Hydraulically adjustable drawbar
Hydraulic-pneumatic brake system – one axle
Hydraulic-pneumatic brake system – two axles
Turbo-filler
Suction arm + turbo-filler 8"
Submersible suction arm + turbo-filler 8"
Solenoid valves + control panel
Hydraulic compressor control
Frame galvanization
Drawbar galvanization
Mudguard galvanization
K80 ball hitch
Rotating D-50 towing eye
Hydraulic support leg
Upper filling hatch with hydraulic opening 6–8"
Side ladder with platform
Rear end plate opening on hinge
Vertical fill-level indicator with 2" valve
Painting of galvanized tank in one colour
Suction hose 6" (Ø 150 mm)
Quick couplings 6"–8"
Tow eye D-60
Tow eye K-80
Tow eye D-50 rotating
Manual support leg
Hydraulic support leg
Hand brake
Vacupress hoses 60–100 m
Flex hoses Ø 110–200 m
Manual lever for 8" gate valve
Vacuum pumps 3000–14800 L/min

Custom configuration available.